Absolute Automation Knowledgebase » ELK Products
It is important to make sure that the firmware in the M1 is version 5.2.10 and the firmware in the M1XRFTW is version 1.2.48. To view the ELK-6030 motion sensor please see these links – Canada – http://www.absoluteautomation.ca/elk6030wirelessmotionsensor.aspx USA – http://www.absoluteautomation.com/ek6030-elk-6030-wireless-motion-sensor/
If you are using ELKRP2 Software you can have automatically check and download the updated firmware. When you are connected to your M1 system if you go to: “Send/Rcv” in the top menu of RP2 than click: “Enroll/Update Device” in that menu it will bring up a list of the devices which are enrolled in [...]
If the TxID Label is missing you can manually Learn in the sensor through Keypad Programming then use the ElkRP Software to “Receive Wireless Setup” which will retrieve the TxID numbers for all the wireless sensors. Please see the ELK-6022 Installation Manual for instructions on Manually Learning a sensor.