Setting Channel: You select the channel by pressing the up/down key(s). The lock icon must be deactivated before you can change channels. Setting Sub Channel: You select the sub channel by pressing the mode button once. The CTCSS display will begin to flash. You can now select the sub channel by pressing the up/down key(s). The lock icon must be deactivated before you [...]
A. Channel selection: The MURS Alert transmitter is capable of transmitting on any of the 5 MURS channels. To select the proper channel, locate SW1 (#1 in image) and set it to the appropriate channel. B. Sub Channel (CTCSS) selection: To select the proper CTCSS, locate SW2 (#2 in image) and SW3 (#3 in image). SW2 [...]
Often this is the case, but it’s also important to consider whether you need the most expensive system. The best example of this is with our wireless driveway alarm systems, the MURS units are generally the most expensive and have by far the longest wireless range. However in terms of reliability, sophistication etc. they are [...]
1. Double check battery levels, each should be reading 3.0 or above. 2. Check and increase sensitivity at transmitter box. 3. Do “shovel” test as discussed, remember to leave approx. 30 second windows between activation’s (as indicated by LED in transmitter). 4. Every time the LED activates, the Basestations (as long as it has been [...]
One thing that could be happening with this unit is that it is picking up interference from another MURS unit in the area. This particular unit could be a little more sensitive than the other units and is picking up the carrier on a signal that is to weak to receive the full transmission. To [...]
The Murs Basestation M538BS has a NO dry contact relay on it which can be set to close when the M538BS receives an alert signal from a MURS transmitter. For this to happen the M538BS and whichever MURS transmitter you are using both need to be set to Channel 1 Sub Channel 1.