We have several steps to follow to try and stop a Dakota Alert DCMA-2500 system from ‘false’ alarming or trouble shooting where the problem may lie. 1. Check and replace the 9V battery. False alerts are almost always a symptom of low battery power. 2. Switch the sensitivity (labelled as ‘range’ on the jumpers) to ‘low’ and […]
Articles Tagged: dcma
Help troubleshooting my Dakota Alert infra-red motion driveway alarm.
First we recommend lowering the sensor to about 2 – 3 feet of the ground. Also, make sure all transmitter dip switches (there’s 10 of them) inside the sensor are set to “0” or “Off” and match the switches inside the chime/receiever (there’s 8 switches in the receiver). Don’t forget, anytime you make any change […]